Amana furnace code b5: Blower Motor Locked Rotor
Professional repair
What does b5 mean on an Amana furnace? The ECM blower motor failed to start 10 times in a row, and the furnace won't operate while the motor can't start. The service manual's probable causes are an obstruction in the blower housing or wheel, seized motor bearings, or a failed blower motor.
Before you touch anything: the six signs that mean stop troubleshooting and call a pro →
Blower wheel, bearing and motor inspection. DIY part cost: $400–800 — a pro visit for this class of fault typically runs $150–350.
What causes it (in order of likelihood)
- Obstruction in the blower housing or wheel TECH
- Seized motor bearings or a failed blower motor TECH
Parts referenced by this code
Always match parts against your model's parts list — part numbers vary within a series.
Questions about this code
What does b5 mean on an Amana furnace?
The ECM blower motor failed to start 10 times in a row, and the furnace won't operate while the motor can't start. The service manual's probable causes are an obstruction in the blower housing or wheel, seized motor bearings, or a failed blower motor.
How do I fix Amana furnace code b5?
Keep your hands out of the blower compartment. A technician should look for an obstruction and check the wheel, bearings and motor.
How much does it cost to fix Amana furnace code b5?
Cost depends on whether something is jammed in the blower or the motor itself has failed. The inspection tells you which.
Applies to
AMVC96 · ACVC96
Different Amana generations use different code maps. If your series isn't listed, don't assume this meaning — check your blower-door label.
Same control platform, same code: Goodman furnace code b5
Full code lists for the other brands on this control platform: Goodman furnace codes
Verified against Goodman GMVC96/GCVC96 Service Manual, p.45 — “This condition occurs if the motor fails to start after (10) consecutive attempts.”
Verified against Goodman GMVC96/GCVC96 Service Manual, p.51-52 — “b5 BLOWER MOTOR LOCKED ROTOR”
Verified against Goodman Diagnostic Code Identification System (GMVC96, GCVC96, AMVC96, ACVC96; code b5) — “Blower Motor Locked Rotor”
Amana AMVC96/ACVC96 furnaces use the same control board and code map as the Goodman GMVC96/GCVC96 — the cited Goodman service manual is the platform document for both brands.
Last verified 2026-10-19 · page updated 2026-10-20 · how we verify
Related Amana furnace codes
These codes use the same dual 7-segment display (two-stage variable-speed) system.