AMANA DIAGNOSTIC REFERENCE DUAL 7-SEGMENT DISPLAY (TWO-STAGE VARIABLE-SPEED) DOC AMANA-E7

Amana furnace: Igniter Fault or No Ground (E7)

Igniter Fault or No Ground (E7). Official: check for a broken or improperly connected igniter; check for proper ground and correct.

E7 YOUR LIGHT: DISPLAY CODE E7 — MATCH IT ABOVE

Try DIY first, then call a pro

What does E7 mean on an Amana furnace? Official: check for a broken or improperly connected igniter; check for proper ground and correct.

GOOD NEWS: THE FIRST CHECKS ARE FREE AND TAKE MINUTES.

Try these first — in this order

Igniter swap, 20 minutes, don't touch the element.

1Check: Broken/disconnected igniter

Grounding issues. DIY part cost: $15–35 — a pro visit for this class of fault typically runs $150–350.

0130F00008S — Hot Surface Igniter

$15–35 · also sold as 594476

Always match parts against your model's parts list — part numbers vary within a series.

AMVC96 · ACVC96

Different Amana generations use different code maps. If your series isn't listed, don't assume this meaning — check your blower-door label.

Verified against Goodman GMVC96/GCVC96 Service Manual, p.44

Last verified 2026-07-06 · how we verify

These codes use the same dual 7-segment display (two-stage variable-speed) system.

Pattern	Meaning
E6	Low Flame Sense Signal (E6)
E8	High-Stage Pressure Switch Stuck Closed (E8)
E5	Open Fuse (E5)
E9	High-Stage Pressure Switch Stuck Open (E9)